What are the attention points of heavy machine maintenance?

In the production, the heavy machine is a very important equipment, which can be used to check whether the weight of the product in the packaging bag meets the standard. In order to ensure the effectiveness and life of the machine, maintenance is very important. The following are the precautions for the maintenance of the heavy machine:

1. Regular cleaning of the heavy machine: Before using the heavy machine, pay attention to cleaning its working surface, conveyor belt and other components, because impurities and dust in canned food and packaging bags are easy to stick to the heavy machine, affecting the accuracy and service life. At the same time, long-term use will also lead to the accumulation of dust and dirt in various parts of the equipment, so regular cleaning inspection will improve the detection accuracy and stability.

2. Regularly check the equipment: the heavy machine should be turned on and off in time after use. If the equipment is found faulty or abnormal, it needs to be checked immediately and solved in time. If there are abnormal sounds and other phenomena during use, it is necessary to check whether the canned food is placed normally, whether the transmission part is normal, whether the instrument is stable and so on. At the same time, regular inspection of the heavy machine electrical equipment, transmission parts and other key components, find fault timely repair.

3. Keep the heavy machine parts dry: If the heavy machine is used in a humid environment, it will lead to corrosion and damage to the parts, so it is necessary to keep its parts and key parts dry. If parts and accessories are found to be damp, they should be cleaned and dried in time.

4. Timely lubrication: In the process of using the heavy machine, all components need to be lubricated in time. This can greatly extend the service life of the machine during use, but also improve its performance, reduce noise and friction. However, it should be noted that the use of lubricant should be appropriate, and excessive use will cause damage to the system.

5. Timing calibration: Calibrating the heavy machine can increase its working accuracy and stability. In the production process, there will also be measurement errors caused by inaccurate positioning or failure, so it is very important to calibrate the heavy machine regularly. The operator should calibrate various parameters according to the manufacturer's instructions, so as to ensure the measurement accuracy and high stability of the heavy machine.

6. Maintenance of the electrical inspection machine: The electrical components inside the inspection machine are one of the core components of the equipment, so checking their condition is also very important for the maintenance of the inspection machine. Check whether there is a power failure or open circuit phenomenon in the electrical line, but also pay attention to whether the electrical parts are worn, if you find some small faults, do not try to repair it yourself, but to seek the help of professional technicians.

7. Regular replacement of parts: After a period of use, it is necessary to regularly replace parts to improve the use effect and life of the heavy machine. If the transmission chain is loose, shaft surface wear and other phenomena, it is necessary to replace the parts of the heavy machine in time. Replace parts according to the operating instructions of the equipment to avoid unsafe personnel and equipment.

In short, the maintenance of the heavy machine is very critical, only the proper maintenance of the equipment to ensure the stability of the performance of the equipment, extend the service life of the equipment, to ensure the efficient and smooth operation of the equipment in production, improve production efficiency.