How to do if the printing and labeling machine fails?

Printing and labeling machine is a very important equipment. There are a variety of models on the market, and due to the high frequency of use, it is inevitable that they will encounter failures.

However, if we know the common faults and know how to solve them, we can effectively prevent the impact of the failure of the labeling machine and ensure the efficiency and stability of the operation. Printing and labeling machine manufacturers will introduce 5 ways to solve the common printing and labeling machine failure problems.

1. The fault cannot be printed out

The cause of this failure may be insufficient ink cartridge or ink, dirty printing head, or line interface failure. At this time, we need to check and troubleshoot the printer. First of all, check whether the ink cartridge needs to be replaced. If the print head is dirty, you can clean it with cleaning liquid or leather stone. If the line is faulty, replace the line or reinsert the line.

2. The label is automatically torn off

If the label tears off automatically, then the cause is most likely caused by the printing head. Sometimes it can be because the font is too big or too bold. The problem can be solved by reducing the font size or reducing the font thickness.

3. Label printing quality is not good

If the label printing quality is not good enough, you need to check whether there is dust or stains. Sometimes it may be that the printing head is dirty and needs to be cleaned, or there is not enough ink and the right amount of ink needs to be reinstalled or injected.

4. Labels are not tightly attached

If such a problem occurs, we need to check whether the label raw materials used are not good enough. Sometimes the label machine needs to adjust the dynamic parameters to ensure that the label is tightly attached. Continue debugging and solve the problem.

5. Labels are misaligned

It is better to check the template specifications and standards of the layout. If the specifications are correct, then it is likely that the typesetting software is set up differently.

In each case, the failure of the print labeling machine has different causes and solutions. Understanding these causes and methods can greatly improve our operational experience and make our work more efficient and simpler. We can adjust and maintain our printing and labeling machines to solve common problems. Of course, if the above methods can not solve the problem, we can also contact customer service to solve the printing and labeling machine failure.